Industrial Automation, PLC, VFD, and Troubleshooting
As Studio 5000 projects become larger, tag organization becomes increasingly important.
A small machine may only have a few motors, valves, sensors, and alarms. In that type of project, individual tags …
Read MoreOne of the biggest challenges in industrial troubleshooting is dealing with problems that happen too fast to observe.
A sensor may turn off for only 100 milliseconds. A motor feedback signal …
Read MoreTimers are everywhere in industrial automation.
A motor may need a few seconds to prove that it started. A valve may need time to reach its open position. A photoeye signal …
Read MoreIf you are learning Studio 5000, one of the first instructions you will see everywhere is the MOV instruction. At first glance it looks almost too simple, but in real …
Read MoreOnline editing is one of the most powerful features in Studio 5000 Logix Designer.
It allows a PLC programmer or automation technician to modify certain ladder logic while connected to the …
Read MoreAfter creating a Studio 5000 project, configuring tags, building ladder logic, and setting up I/O modules, the next major step is connecting to the controller.
This is where the PLC project …
Read MoreIn Studio 5000 Logix Designer, I/O modules automatically create module-defined tags.
These tags are technically correct, but they are not always easy to read.
For example:
Local:1:I.Data.0Local:1:I.Data.1Local:2:O.Data.0Local:2:O.Data.1
These tags tell you where the signal …
Read MoreIn Studio 5000 Logix Designer, the I/O Configuration is where the PLC project is connected to the real hardware.
This is where you define the modules, communication devices, input cards, output …
Read MoreWhen working with tags in Studio 5000 Logix Designer, one of the most important concepts to understand is scope.
Scope defines where a tag can be used inside the PLC project.
In …
Read MoreOne of the biggest differences between older Allen-Bradley PLC platforms and Studio 5000 Logix Designer is the way memory is identified.
In older PLC systems, you may see addresses like:
B3:0/0N7:0T4:0C5:0I:1/0O:2/0
In Studio …
Read More