Industrial Automation, PLC, VFD, and Troubleshooting
A PLC does not execute logic randomly.
It follows a repeated process called the scan cycle.
Understanding the scan cycle is one of the most important steps in learning PLC troubleshooting and …
Read MoreLadder logic is one of the most common programming languages used in industrial automation.
It is used to program PLCs that control machines, conveyors, pumps, valves, motors, packaging equipment, process systems, …
Read MoreA PLC program should do more than make a machine run.
A professional PLC program should be:
OrganizedReadableTroubleshooting-friendlySafeConsistentExpandableMaintainable
In real industrial environments, machines are modified, maintained, repaired, upgraded, and troubleshot by different technicians …
Read MoreIn industrial automation, two words appear constantly in PLC logic:
PermissiveInterlock
They are related, but they are not exactly the same.
Understanding the difference helps automation technicians troubleshoot faster, read ladder logic better, …
Read MoreIn industrial automation, many machines operate in steps.
A door opens, stops, closes, and faults.A conveyor starts, runs, stops, and detects jams.A filler waits for a bottle, fills, verifies level, and …
Read MoreTimers, counters, and one-shots are some of the most important instructions in PLC programming.
They are used in almost every industrial machine.
A PLC program does not only turn outputs ON and …
Read MoreIn industrial automation, not every input signal is clean.
A sensor may flicker.A push button may bounce.A limit switch may chatter.A photoeye may blink because of vibration, dust, or product movement.A …
Read MoreIn professional PLC programming, one of the best practices is to separate raw physical I/O from the logic used inside the program.
This is done using:
Input BufferingOutput Buffering
Input buffering means copying …
Read MoreIn industrial automation, faults are not just “alarms”.
They are controlled safety states that protect:
MachinesProcessesOperatorsProduct qualitySystem integrity
But one of the most important parts of fault design is not just detecting the …
Read MoreLadder Logic Basics in Studio 5000
Ladder logic is one of the most important programming languages for automation technicians and PLC programmers to understand.
Even though Studio 5000 Logix Designer supports multiple …
Read More