Commissioning is the stage where a PLC control system moves from programmed to proven in the real machine.
A program may look correct offline and still fail during startup because commissioning …
Read MoreThroughout this PLC series, we repeatedly used an important programming concept:
Do not build your entire machine logic directly from physical I/O addresses.
Instead, create a clean separation between the real hardware …
Read MoreIntroduction
Once you understand what the FANUC Teach Pendant is, the next step is learning how to navigate the most important screens.
For an automation technician, the goal is not to memorize …
Read MoreIntroduction
Directional control valves are among the most important components in an industrial pneumatic system.
The compressed-air supply provides energy, but the directional valve determines where that air goes.
By changing the airflow …
Read MoreIntroduction
A pneumatic system can only operate correctly when the compressed air supplied to the machine is clean, dry, and maintained at the proper pressure.
A PLC may activate the correct output, …
Read MoreIntroduction
In industrial automation, pneumatic systems are one of the most commonly used technologies for creating fast, reliable, and repetitive mechanical movement.
From simple box pushers on conveyors to complex filling, packaging, …
Read MoreIntroduction
Every industrial automation system is built on four fundamental electrical concepts:
Voltage
Current
Resistance
Power
These four concepts explain why a sensor works, why a relay energizes, why a motor turns, and why electrical components …
Read MoreIndustrial automation depends completely on electricity.
A PLC cannot read a sensor without electrical power. A VFD cannot control a motor without a three-phase supply. A solenoid valve cannot move without …
Read MoreWhy Good Troubleshooting Starts Before You Touch a Tool
Troubleshooting an electrical control panel is not just about using a multimeter, replacing parts, or resetting faults. A good technician must first …
Read MoreWhat Every Technician Should Check Before Testing Live Circuits
Troubleshooting an electrical control panel can be one of the most important skills for an automation or maintenance technician. But before using …
Read More