Industrial Automation, PLC, VFD, and Troubleshooting
Using CTU, CTD, and RES to Count Real-World Events
Counters are one of the most useful instructions in PLC programming because industrial machines are constantly counting something.
A PLC may need to …
Read MoreUnderstanding the Three Most Common PLC Timer Instructions
Timers are one of the most important instructions in PLC programming. They are used everywhere in industrial automation.
You will see timers used for:
Start-up …
Read MoreOne of the Most Important PLC Ladder Logic Patterns
One of the first ladder logic circuits every PLC beginner should understand is the Start/Stop seal-in circuit.
This circuit is also called a:
Start/Stop …
Read MoreHow a PLC Reads, Thinks, and Acts
One of the most important concepts for anyone learning PLCs is the PLC scan cycle.
At first, ladder logic may look like electrical wiring, but …
Read MoreSafety Should Not Depend Only on PLC Logic
In industrial automation, an Emergency Stop is one of the most important safety devices on a machine. It is not just another push …
Read MoreHow PLCs Connect to the Real World
A PLC does not control a machine by itself. It needs a way to receive signals from field devices and send commands back to …
Read MoreThe Basic Foundation of Every PLC-Controlled System
Every PLC-controlled machine, no matter how simple or complex, follows the same basic control idea:
Inputs provide information, logic makes decisions, and outputs perform the …
Read MoreWhen a PLC-controlled machine stops working, the problem is not always in the ladder logic. Many times, the real issue is related to power, field wiring, sensors, output devices, I/O …
Read MoreFiltering Noisy Inputs and Preventing Unstable PLC Logic
In industrial automation, field devices do not always send perfectly clean signals to the PLC. A sensor, limit switch, push button, or relay …
Read More