Industrial Automation, PLC, VFD, and Troubleshooting
State machines are one of the most powerful programming concepts used in industrial automation.
They are especially useful when a machine can exist in several clearly defined operating conditions such as:
Idle
Starting
Running
Stopping
Opening
Closing
Manual
Automatic
Faulted
Instead …
Read MoreOnline editing is one of the most powerful features in Studio 5000 Logix Designer.
It allows a PLC programmer or automation technician to modify certain ladder logic while connected to the …
Read MoreAfter creating a Studio 5000 project, configuring tags, building ladder logic, and setting up I/O modules, the next major step is connecting to the controller.
This is where the PLC project …
Read MoreIn Studio 5000 Logix Designer, I/O modules automatically create module-defined tags.
These tags are technically correct, but they are not always easy to read.
For example:
Local:1:I.Data.0Local:1:I.Data.1Local:2:O.Data.0Local:2:O.Data.1
These tags tell you where the signal …
Read MoreIn Studio 5000 Logix Designer, the I/O Configuration is where the PLC project is connected to the real hardware.
This is where you define the modules, communication devices, input cards, output …
Read MoreWhen working with tags in Studio 5000 Logix Designer, one of the most important concepts to understand is scope.
Scope defines where a tag can be used inside the PLC project.
In …
Read MoreOne of the biggest differences between older Allen-Bradley PLC platforms and Studio 5000 Logix Designer is the way memory is identified.
In older PLC systems, you may see addresses like:
B3:0/0N7:0T4:0C5:0I:1/0O:2/0
In Studio …
Read MoreLadder Logic Basics in Studio 5000
Ladder logic is one of the most important programming languages for automation technicians and PLC programmers to understand.
Even though Studio 5000 Logix Designer supports multiple …
Read MoreUnderstanding the Controller Organizer in Studio 5000
When you open a project in Studio 5000 Logix Designer, one of the most important areas is the Controller Organizer.
The Controller Organizer is the …
Read MoreCreating Your First Studio 5000 Project
Creating a new project in Studio 5000 Logix Designer is one of the first practical skills every PLC programmer and automation technician should understand.
A Studio …
Read More