In the previous article, we compared three common ways of representing PLC I/O:
Direct physical I/O
Alias Tags
Mapped controller tags
Now it is time to build the mapping layer itself.
For digital signals, one …
Read MoreIn the previous article, we built a complete digital I/O architecture.
Digital signals are relatively simple:
0 = OFF
1 = ON
Analog signals are different.
An analog input may represent:
Tank level
Pressure
Temperature
Flow
Speed
Weight
pH
Conductivity
Valve position
Motor current
Instead of …
Read MoreIn the previous article, we followed an analog signal from a field transmitter into the PLC:
Field Instrument
↓
Analog Input Module
…
Throughout this series, we have explored several different ways to handle I/O in Studio 5000.
We started with the simplest possible approach:
Local:1:I.Data.0
Then we introduced:
Alias Tags
Individual Mapping
MOV
COP
CPS
UDTs
Digital I/O Processing
Analog Scaling
Analog Output Processing
Performance …